Air Spring Post Mount System
Revolutionary spring-based system for displaying artwork on posts, complies with EN40 regulations and had a 5 year warranty. It accommodates a range of banner sizes and is very very strong - watch the video of us trying to break it!
- Revolutionary spring-based system for displaying artwork on posts
- Very, very strong – watch the video of us trying to break it!
- Complies with important EN40 Regulations
- Full 5 year warranty
- Accommodates a range of banner sizes
The Air Spring System is our first post mounted product which complies fully with the all-important Government EN40 Regulation which stipulates the maximum wind load that any type of signage is allowed to exert onto a standard street lighting column. Many Councils and Local Authorities stipulate compliance to these regulations as part of their tender documentation.
The Air Spring's compliance with this standard makes it ideal for lamp posts in public locations. Key Air Spring features include: Proven design with market-leading wind-spill factor. System comprises of;
- 2 black fibre glass arms
- 2 black powder-coated aluminium brackets with integrated spring loaded tensioning and banner-arm flexing mechanism.
Full compliance with EN40 Government Regulation that dictates all lighting columns must be capable of facilitating the wind loading that a single 0.3 square meter rigid road sign would exert. Wind tunnel tested up to 100mph and supported by verified wind tunnel test results (available in PDF format) illustrating compliance with EN40.
Suitable for installing onto lamp columns and flag poles from 76mm diameter and above and compatible with straight, fluted or tapered columns. Arms can be cut down to match any banner width required up to 800mm wide. Most common banner sizes recommended are 2000mm (L) x 600/750/ 800mm (W) and 2200mm (L) x 600/750/800mm (W). Maximum banner size accommodated 3000mm x 800mm (only for short term or very low-wind area). Can accommodate one or two banners per column. Arms easily removed in between banner campaigns leaving brackets and banding in place on the column. Brackets installed onto columns using 3 tamtorque stainless steel bands per bracket, estimated installation time to install one complete system and banner: 20 minutes. Can be wall mounted using pre-drilled holes within bracket. Full 5 Year product warranty.
Banner fabrication exactly the same as for our Heavy Duty systems. The system comprises two brackets and arms. Please note, this product is for a single arm only. You will need to purchase this product with a quantity of 2 for a complete set. The standard arm width is 850mm, our recommended banner size is 750mm x 2500mm (1.87 sq. m) but the maximum size is 800mm x 3000mm (2.4 sq. m), this size should only be considered for short term use in areas with low average wind-speeds. Arms can be cut down to size if required, there is an additional charge of £2.00 + VAT per cut for this service. Please use the notes on the checkout to request this and we will make contact once your order is received to confirm this.
In addition to this item you will need 6 banding straps per set (3 per bracket) of the appropriate diameter for your lamp posts and a drill bit banding tool, please add these to your basket once you have added the required number of arms to your basket.